JUSTRITE® Cans and Funnels
Two Polypropylene or Stainless Steel quick disconnects permit simple attachment of one inlet and one vent
Ideal for HPLC use, Justrite® Centura™ containers streamline the waste containment and disposal process by providing a simple means of connecting waste and vent lines. FM approved, the containers are designed with a spring-loaded closure that opens when contents are subjected to pressure, for explosion safety. Containers are molded of translucent Polyethylene to show fluid level. When ordering, note that quick disconnects will only mate with like materials, i.e., stainless disconnects with stainless. Note that the disconnects mounted on all containers have a 3/8" drain orifice. Also note that Justrite® containers should be grounded with Antistatic Wires while in use, and especially while emptying the container.
Versatile Configurations
VAPLOCK “SF Series” funnels (4" and 8" diameters) allow for safer disposal of pourable laboratory waste. A locking, hinged lid minimizes leaks and spills when the funnel is closed. If used in tandem with other Vaplock products, such as a manifold and exhaust filter, a closed system may be maintained for passive wastes while the funnel is sealed. Justrite Centura containers are available with two Polypropylene (with EPDM o-ring) and Stainless Steel (with PTFE o-according to the type of disconnect material present on the safety constructed of high density Polyethylene (HDPE) and Polypropylene, with a Viton® sealing gasket. As with all solvent applications, chemical compatibility should be noted prior to purchase.